Trackting DOT - Add or remove a Tag
This procedure applies only to Trackting DOT. Do you have Trackting SMART? Follow the procedure for SMART.
NOTE: you can pair up to 3 Tags with the same Trackting DOT. Each Tag can only be paired with one device at a time.
-
Before you start
You will need:
- your smartphone with the Trackting App;
- the Tag to add or remove;
- the USB-C cable and a charger or a power bank.
Throughout the procedure, stay close to the motorcycle with your smartphone and the Tag. You don't need to remove anything: the device stays in the seat.
-
01
How to add a Tag
- Open the Trackting App and tap the "Vehicle" tab at the bottom, or open the device from the vehicle list (icon with three horizontal lines) and tap Device Details.
- Tap Tag Management.
- Connect the USB-C cable to the port on the seat and to a charger or a power bank.
- Tap Connect.
- Follow the guided procedure that opens in the App.
Once the Tag is paired, its LED gives 4 or 5 blue flashes.
-
02
How to remove a Tag
- Open the Trackting App and tap the "Vehicle" tab at the bottom, or open the device from the vehicle list and tap Device Details.
- Tap Tag Management.
- Connect the USB-C cable to the port on the seat and to a charger or a power bank.
- Tap Connect.
- Select the Tag to remove and follow the guided procedure in the App.
-
When you're done
Unplug the cable from the seat. Remember that while it is charging, Trackting DOT does not go into alarm.
Need help? Contact Customer Support.
