How to install BIKE T8 for bottle cage

Learn how to install BIKE T8 on your bike or e-bike

Step #1

Attaching BIKE T8 to your bicycle is quick and easy. Just follow these simple steps.

To install Trackting BIKE T8, your bike frame must have the holes for the bottle cage.

WARNING: if the bottle cage holes are located on a removable part (e.g. the cover of an accessory compartment), the device could be easily removed!

Position the device so that its holes line up with the bottle cage holes on the bike frame.

Step #2

Place the bottle cage over the device and secure everything with the 2 special anti-tamper screws using the tool found in the box.

WARNING: Tighten the 2 screws without over-forcing them: you could damage the screw head and you would no longer be able to remove the device.

Step #3

Done! Now you can attach the water bottle to conceal the device even more effectively.

IMPORTANT:

1. If you plan to go on rides that involve crossing waterways, you must remove the device beforehand.

2. The rubber protective cap of the USB-C connector must always be fitted on the device to protect it from liquids and dust.

3. Do not aim direct water jets at the area where the device is installed: you can use a damp cloth.

Choose the right model for your bike

2 models. 1 for every need. With and without subscription.